HD-609A tensile testing machine, tensile testing machine metal Xiamen, Fuzhou, rubber tensile testing machine, tensile testing machine Quanzhou electronic machine details: 
 Tensile testing machine, also known as electronic testing machine, mainly used in plastic plates, pipe, profile, plastic film and rubber, wire and cable, waterproof membrane, wire and other materials of various physical and mechanical properties testing, testing machine used on the metal material and non-metallic materials for tension, compression, bending, shear, peel and so on mechanical properties with the mechanical test 

 Design Standards: ASTM D903, GB/T16491, GB/T1040, GB/T8808, GB13022, GB / T 2790/2791/2792, CNS-11888, JIS K6854, PSTC-7 


 Tensile testing machine main technical parameters: 
 Capacity: 5,10,20,25,50,100,200 kg (optional) 
 Units switch: G, kg, N, LB 
 Control mode: PC-style control of the whole 
 Load Resolution: 1 / 250, 000 
 Load precision: ≤ 0.2% 
 Stroke: 1000mm (excluding fixtures / Including fixture) 
 Test speed :50-300mm / min (variable speed knob) 
 Display mode: PC display 
 Dimensions: (L × W × H) 52 × 52 × 120cm 
 Weight: 70kg 
 Power: 220V, 3A, or designated 
 Distribution: pull a fixture 


 Tensile testing machine HD-609A Features: 
 Work using windows platform, all the parameter settings dialog in the form of processing, simple operation; 
 Single screen action, without the need for switching the screen; 
 Software interface with the Simplified Chinese, Traditional Chinese and English in three languages, switching easily; 
 Test reports may be planning their own model; test data can directly call the main screen; 
 Pan can be used to compare means of simultaneous multi-curve of the data comparison; 
 With a variety of measurement units, metric and inch switchable; 
 With automatic return to position function; with automatic correction function; with automatic magnification power 


 Tensile testing machine care and maintenance 

 1, tensile testing machine in the test, you must ensure that the system warm up for 20 minutes in advance, so that the temperature to minimize the impact. 
 2, the buffer should be kept clean oil, the oil level when less than two-thirds of the deep tube should be immediately replaced. 
 3, tensile strength test machine before starting, check whether the moving parts of friction should be filled with oil. 
 4, in the blessing before the specimen must be stuck brake handle, plus a good specimen after the release. 
 5, the main bearing dynamometer does not allow refueling. Surface of the gearbox friction wheel may not have fuel or oil spill, the friction surface should be absolutely clean, not to arm the violent impact of the block slope. 
 6, the test is completed, cut off the power, to give the test machine for surface cleaning, timely protection to prevent surface rust. 
 7, the average monthly tensile machine 2 to 3 times maintenance.